Udemy IPV6 Deep-Dive

---

What you'll learn:

• IPv6 Address
• IPv6 Address Simplification Rules
• IPv6 Address Types
• IPv6 Multicast Address
• IPv6 Unicast Address Types - Unspecified and Loopback
• IPv6 Unicast Address Types - Unique Local Address
• IPv6 Unicast Address Types - Link Local Address
• IPv6 Unicast Address Types - Global Unicast Address
• IPv6 Unicast Address Types - GUA Subnet Prefix
• IPv6 Unicast Address Types - Embedded IPv4
• IPv6 Global Unicast Address Manual Configuration
• IPv6 Unicast Routing
• IPv6 Dynamic Address Assignment - SLAAC
• IPv6 Router Address Assignment with SLAAC
• IPv6 - Path MTU Discovery (PMTUD)
• IPv6 - Dual Stack Migration Strategy
• IPv6 - Tunneling - MCT with Static Routing
• IPv6 - Tunneling - MCT with Dynamic Routing
• IPv6 - Tunneling - GRE
• IPv6 - Tunneling - Automatic 6to4 ( Private Address )
• IPv6 - Tunneling - Automatic 6to4 ( Public Address )
• IPv6 - Tunneling - ISATAP
• IPv6 - NAT64 Introduction
• IPv6 - Static NAT64
• IPv6 - NAT64 with DNS64
• IPv6 - IPv6 Deployment Models
• IPv6 - IPv6 and IPv4 Characteristics
• IPv6 - IPv6 Enhancements over IPv4

Requirements:

• CCNA

Description:



Internet Protocol version 6 (IPv6) is the most recent version of the Internet Protocol (IP), the communications protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. IPv6 was developed by the Internet Engineering Task Force (IETF) to deal with the long-anticipated problem of IPv4 address exhaustion, and is intended to replace IPv4. In December 1998, IPv6 became a Draft Standard for the IETF, which subsequently ratified it as an Internet Standard on 14 July 2017.Devices on the Internet are assigned a unique IP address for identification and location definition. With the rapid growth of the Internet after commercialization in the 1990s, it became evident that far more addresses would be needed to connect devices than the IPv4 address space had available. By 1998, the IETF had formalized the successor protocol. IPv6 uses 128-bit addresses, theoretically allowing 2128, or approximately 3.4×1038 total addresses. The actual number is slightly smaller, as multiple ranges are reserved for special use or completely excluded from use. The two protocols are not designed to be interoperable, and thus direct communication between them is impossible, complicating the move to IPv6. However, several transition mechanisms have been devised to rectify this.IPv6 provides other technical benefits in addition to a larger addressing space. In particular, it permits hierarchical address allocation methods that facilitate route aggregation across the Internet, and thus limit the expansion of routing tables. The use of multicast addressing is expanded and simplified, and provides additional optimization for the delivery of services. Device mobility, security, and configuration aspects have been considered in the design of the protocol.


Who this course is for:

• Network Engineers